Product Guide

Products for Tanks & Tracked Vehicles

Bonded Tube Mounts: Barry-Bond Series
Versatile, low cost elastomeric isolators protect against shock & vibration and reduce structure-borne noise in vehicular and industrial applications. Barry-Bond Mounts are designed for multidirectional vibration isolation, shock attenuation and noise reduction due to structure borne vibrations. These one-piece, fail-safe mounts are easy to install and provide consistent performance.

Downloads:   Barry-Bond | Performance: BC1120/ BC1121 / BC1122 / BC1123, BC1124 / BC1125
                    Dimensions and Bolt Information | Mounting | Dimensions and Load Information
                    For whole Barry-Bond Mount catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
Bonded Tube Mounts: Industrial Conical Mount Series
Rugged, high load capacity mounts provide vibration, shock and noise protection. 500 Series mounts are low cost isolators that provide high load carrying capacity, compact size and stability. These all attitude mounts are perfect for isolating truck, bus and marine engines.

Downloads:   Conical Mount | Dimensions and Performance: 27327 / 27328 | 26748 | 26749 / 27595 |
                    Dimensions and Selection Guide
                    For whole Navy Mount catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
Cup Style Mounts: Cupmounts
A universal set of mounts for protection from severe shock environments, high-frequency vibration and structure borne noise. Barry Cupmounts combine protection against severe shock with efficient vibration isolation characteristics at frequencies above 40 Hertz. They can be mounted in any orientation for protection of sensitive electronic, electrical and mechanical equipment from high impact shocks.

Downloads:   Cupmount | Dimensions and Performance: 1000, 2000, 3000, 4000 | Ordering Information
                    For whole Navy Mount catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
Cup Style Mounts: S Mount Series
Low-frequency variable air-damped mounts for a high level of vibration isolation. Barry S-Mounts are air-damped isolators and are designed to provide the highest degree of vibration isolation for sensitive commercial and military airborne equipment. S-Mounts are particularly effective at isolating low level vibration.

Downloads:   S Mount | Dimensions: S22, S44 / S64
                    For whole S Mount catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
Cup Style Mounts: T Mount Series
General purpose, all-attitude isolators for mounting aircraft, shipboard or vehicular equipment. Barry T-Mounts are general purpose isolators for mounting aircraft, shipboard or vehicular equipment in any attitude. They are ideally suited for applications requiring high frequency vibration isolation with low resonant amplification.

Downloads:   T Mount | Dimensions and Performance: T22, T44, T64, T94
                    For whole T Mount catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
High Deflection Mounts: GBCO (Barry-Flex)
Low-profile, high-deflection elastomeric shock & vibration isolators protect sensitive military equipment in harsh environments. Barry-Flex isolators are designed for harsh environments where high-amplitude shock and vibration are encountered. Their rugged design and high deflection capabilities are ideal for this type of environment.

Downloads:   Barry-Flex Isolator | Dimensions and Performance
                    For whole Navy Mount catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
High Deflection Mounts: HTTA Series
Low-frequency, highly damped mounts for high level shock and vibration isolation. Barry HTTA-Series Mounts are low frequency isolators with a large deflection capacity to provide both Vibration and shock protection. They are designed to meet the requirements of MIL-STD-810C for mounting electronic equipment in helicopter environments.

Downloads:   HTTA Mount | Dimensions and Performance
                    For whole HTTA Series catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
High Deflection Mounts: ME Series
An effective isolation solution for installations where instrumentation is subjected to rugged environmental conditions. ME Series Mounts are low frequency, free standing isolators which are environmentally resistant and operate over a wide temperature range. They are for use in isolating delicate instrumentation in mobile, military or office equipment applications.

Downloads:   ME Mounts | ME100 Dimensions | ME500 Performance
                    For whole ME Series catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
High Deflection Mounts: TTA Series
Mid-frequency, high deflection mounts for protection from severe vibration and shock. The TT-A mount is a mid frequency isolator which combines a low profile and large deflection capability in order to provide both shock and vibration protection. The TT-A is ideal for applications where high amplitude vibration inputs are expected or where large shock deflections are needed.

Downloads:   TTA Mounts | Dimensions and Performance
                    For whole TTA Series catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
Machinery Mounts: 633A Series
Low-profile, low frequency elastomeric noise and vibration isolators for medium weight industrial equipment. Barry 633A Series Mounts are medium weight mounts normally used for vertically applied loads to prevent transmission of noise and vibration caused by rotation of imbalanced equipment (i.e. generators, blowers, pumps, etc...)

Downloads:   633A Mount | Dimensions and Performance: 633A (60-130), 633A (200-260)
                    For whole 633A Mount catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
Machinery Mounts: Industrial Machinery Mounts
Low-frequency elastomeric compression mounts for industrial machinery. Barry Industrial Machinery Mounts are for use under heavy industrial machinery for shock, vibration and/or structure borne noise control. Barry Machinery Mounts provide efficient isolation for machine speeds as low as 750 rpm.

Downloads:   Industrial Mount | Dimensions and Performance: 297, 661, 670
                    For whole Industrial Mount catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
Machinery Mounts: LM Series
Low-profile, high capacity mounts for vibration and shock protection. Barry Leveling Mounts are ideal for protecting heavy industrial equipment and machinery such as CNC machines, punch presses, drill presses, sanders, saws, injection molding and many other types of industrial equipment.

Downloads:   LM Mount | Dimensions and Performance | Ordering Information
                    For whole LM Mount catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
Machinery Mounts: LMS Series
Attenuated levelers designed for leveling and aligning sensitive electronic manufacturing equipment. LMS attenuated levelers are designed for leveling, aligning and isolating sensitive electronic manufacturing equipment. LMS Series levelers feature over .5" of neoprene elastomer bonded to the bottom of the leveler to provide shock-attenuated, non-skid support.

Downloads:   LMS Mount | Dimensions and Performance
                    For whole LMS Mount catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
Machinery Mounts: Neoprene Pad Series
An economical solution to general shock, vibration and noise problems in a variety of applications. Barry Neoprene Pads are designed for use as a general purpose shock, vibration and noise attenuator or where the advantages of elastomeric characteristics are required but a specific type of isolator has not been called out.

Downloads:    Neoprene Pads | Dimensions and Performance
                    For whole Neoprene catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products
Machinery Mounts: SLM Series
Low-profile, high capacity mounts for vibration and shock protection. Barry SLM Series Mounts are pneumatic elastomeric mounts, ideal for applications requiring higher deflection isolators. The SLM's mechanical bond design incorporates a positive locking system to ensure performance and safe operation.

Downloads:   SLM Mount | Performance | Installation | Dimensions and Load Ranges
                    For whole Navy Mount catalog & other catalogs, click Here. 
                    (Best viewed with  MS Internet Explorer, PDF Reader required)
View Products