Low-profile, low frequency elastomeric noise and vibration isolators for medium weight industrial equipment.
Barry 633A Series Mounts are medium weight mounts normally used for vertically applied loads to prevent transmission of noise and vibration caused by rotation of imbalanced equipment (i.e. generators, blowers, pumps, etc...)
Features
Effectively isolate disturbing frequencies as low as 900 rpm (15 Hz)
Cold-rolled steel construction
Optional stainless steel version available upon request for highly corrosive and marine applications.
Elastomer in sheer design
Compressive to shear stiffness of 4:1
Benefits
Effectively interrupts noise transmission paths to prevent sounding board amplification
Extends machinery life
Resistant to oils, most solvents and ozone
Provides up to 90% isolation efficiency at 1,500 rpm (25 Hz)
Load Range
5 load ratings up to 260 lbs. per mount
Applications
Industrial equipment, tools and machinery
Generators
Pumps & blowers
HVAC equipment
Chillers
Environmental Data
Neoprene elastomer has an operating temperature range of -40�F to +200�F (-40�C to +93�C) and is resistant to oils, most solvents and ozone.
Stainless Steel version is corrosion resistant for marine applications.
NATURAL FREQUENCY
8 Hertz
TRANSMISSIBILITY AT RESONANCE
8:1
RESILIENT ELEMENT
Neoprene
STANDARD MATERIALS
Cold Rolled Steel or Stainless Steel
WEIGHT
633A-60 through 130 = 7 oz.
633A-200 and 260 = 16 oz.