Application Matrix


Aircraft

Environment Typical Equipment to be Protected Sources of Vibration-Shock-Noise Other Destructive or Deteriorative Conditions Applicable Specifications and Typical Vibration, Shock, Noise Input Level Desirable Isolator Characteristics Applicable Barry Isolators or Systems
  • Commercial
  •     Piston Engine
  • Flight recorder.
  • Radar.
  • Radios.
  • Air data recorder.
  • Gyroscopes.
  • Instrument panels.
  • Radar antennae.
  • Antenna couplers.
  • Instruments, indicators, gages, etc.
  • Propulsion system (Warm-up & Flight).
  • Air turbulence.
  • Landing impact.
  • Taxiing.
  • Amplified vibration caused by structural resonances.
  • Temperature & humidity extremes.
  • Altitude.
  • Chemical action of hydraulic fluids, fuels, lubricants.
  • Sunlight and ozone.
  • Airframe & Component Manufacturer’s Specifications.
  • Typical Vibration Input:
    5-55 cps - .060” D. A.
    55-500 cps - 10 g
  • Typical shock Input:
    15 g - .011 sec.
    30 g - 011 sec. (Crash safety).
  • Natural frequency 5-15 cps.
  • Maximum isolation efficiency.
  • Low amplification at resonance.
  • Minimum rotational coupling.
  • Minimum shock output.
  • Minimum sway space.
  • Minimum size and weight.
  • Electrical grounding.
  • Designed to ensure equipment survival.
  • L-Mounts; S-Mounts
  • 500 Series; 500 SL Series; 22000 Series; Barry-Bond Series.
  • Cable Mounts
  • ME Series; TTA & TT-B Series
  • Special High-Performance Mounts.
  •     Jets and turboprops
  • Flight recorder.
  • Radar.
  • Radios.
  • Air data recorder.
  • Gyroscopes.
  • Instrument panels.
  • Engine pressure ratio transducers.
  • Radar antennae.
  • Antenna couplers.
  • Instruments, indicators, gages, etc.
  • Propulsion system.
  • Air turbulence.
  • Landing impact.
  • Taxiing.
  • Amplified vibration caused by structural resonances.
  • Temperature and humidity extremes.
  • Altitude.
  • Chemical action of hydraulic fluids, fuels, lubricants.
  • Sunlight and ozone.
  • Airframe & Component Manufacturer’s Specifications.
  • Typical Vibration Input:
    5-55 cps .060” D. A.
    55-2000 cps 10 g.
  • Typical shock Input (half-sine):
    15 g - .011 sec.
    30 g - .011 sec. (Crash safety).
  • Natural frequency 10-25 cps.
  • Operable at commercial jet climb & maneuver attitudes.
  • Maximum isolation efficiency.
  • Low amplification at resonance.
  • Minimum rotational coupling.
  • Minimum shock output.
  • Minimum sway space.
  • Minimum size and weight.
  • Electrical grounding.
  • Designed to ensure equipment survival
  • B-Mounts; T-Mounts; Cupmounts
  • 5200 Series; E21/E22 Series; 6300/6550 Series.
  • 500 Series; 500SL Series; HR Series; 22000 Series; Barry-Bond Series.
  • ME Series; TTA & TTB Series.
  • Special High-Performance Mounts.
  • Military & Other High Performance Aircraft
  •     Piston engine.
  • Flight recorder; .Air data recorder.
  • Radar; Radios.
  • Gyroscopes; Instrument panels.
  • Engine pressure ratio transducers.
  • Radar antennae; Antenna couplers.
  • Instruments, indicators, gages, etc.
  • Electronic countermeasures equipment.
  • Fire control radar & computers.
  • Bomb racks & sights.
  • Cathode ray display tubes.
  • Integrated avionics packages.
  • Propulsion system (Warm-up & Flight)
  • Air turbulence.
  • Landing impact.
  • Taxiing.
  • Amplified vibration caused by structural resonances.
  • Gunfire.
  • Temperature and humidity extremes.
  • Altitude.
  • Chemical action of hydraulic fluids, fuels, lubricants.
  • Sunlight and ozone.
  • Salt Spray.
  • Fungus.
  • Sand and dust.
  • MIL-E-5400; MIL-E-5272; MIL-STD-810
  • Typical Vibration Input:
    5-10 cps .080” D. A.
    10-15 cps .41 g.
    15-75 cps .036” D. A.
    75-1000 cps 10 g.
  • Typical Shock Input:
    15 g - .011 sec.
    30 g - .011 sec. (crash safety).
  • MIL-C-172: Transmissibility (max)
    at 23 cps T<1.00
    at 30 cps T<.35
    at 500 cps T<.20
  • Natural frequency 10-25 cps.
  • All attitude performance for combat aircraft.
  • Maximum isolation efficiency.
  • Low amplification at resonance.
  • Minimum rotational coupling.
  • Minimum shock output.
  • Minimum sway space.
  • Minimum size and weight.
  • Electrical grounding.
  • Designed to ensure equipment survival
  • S-Mounts; L-Mounts; B-Mounts; T-Mounts; Cupmounts.
  • 5200 Series, E21/E22 Series; 6300/6550 Series.
  • Cable Mounts.
  • ME Series; TTA & TTB Series
  • Special High-Performance Mounts.
  •     Jet transports and bombers.
  • Flight recorder; Air data recorder.
  • Radar; Radios.
  • Gyroscopes; Instrument panels.
  • Engine pressure ratio transducers.
  • Radar antennae; Antenna couplers.
  • Instruments, indicators, gages, etc.
  • Electronic countermeasures equipment.
  • Fire control radar & computers, Bomb racks & sights, Cathode ray display tubes, Integrated avionics packages.
  • Propulsion system.
  • Air turbulence.
  • Landing impact.
  • Taxiing.
  • Amplified vibration caused by structural resonances.
  • Gunfire.
  • Temperature and humidity extremes.
  • Altitude.
  • Chemical action of hydraulic fluids, fuels, lubricants.
  • Sunlight and ozone.
  • Salt Spray.
  • Fungus.
  • Sand and dust.
  • MIL-E-5400; MIL-E-5272; MIL-STD-810
  • Typical Vibration Input:
    5-10 cps .080” D. A.
    10-15 cps .41 g.
    15-75 cps .036” D. A.
    75-1000 cps 10 g.
  • Typical Shock Input:
    15 g - .011 sec.
    30 g - .011 sec. (crash safety).
  • MIL-C-172 (general reference for size & hardware requirements).
  • Natural frequency 10-25 cps.
  • All attitude performance.
  • Maximum isolation efficiency.
  • Low amplification at resonance.
  • Minimum rotational coupling.
  • Minimum shock output.
  • Minimum sway space.
  • Minimum size and weight.
  • Electrical grounding.
  • Designed to ensure equipment survival
  • Note: Isolator characteristics are a function of use & location in airframe. Most severe vibration from high speed. Low level flight is dense, turbulent air.
  • T-Mounts; B-Mounts; Cupmounts.
  • 5200 Series; E21/E22 Series; 6300/6550 Series.
  • Cable Mounts.
  • ME Series; TTA & TTB Series.
  • Special High-Performance Mounts.
  •     Jet fighters, interceptors, attack bombers, Special-mission aircraft.
  • Radar; Radios.
  • Air data recorder.
  • Gyroscopes; Instrument panels.
  • Engine pressure ratio transducers.
  • Radar antennae; Antenna couplers.
  • Instruments, indicators, gages, etc.
  • Electronic countermeasures equipment.
  • Fire control radar and computers.
  • Bomb racks and sights.
  • Integrated avionics packages.
  • Photographic and other optical equipment.
  • Propulsion system.
  • Air turbulence.
  • Landing impact.
  • Taxiing.
  • Amplified vibration caused by structural resonances.
  • Gunfire.
  • Temperature and humidity extremes.
  • Altitude.
  • Chemical action of hydraulic fluids, fuels, lubricants.
  • Sunlight and ozone.
  • Salt spray.
  • Fungus.
  • Sand and dust.
  • MIL-E-5400; MIL-E-5272; MIL-STD-810.
  • Typical Vibration Input:
    5-10 cps .080” D. A.
    10-15 cps .41 g.
    15-75 cps .036” D. A.
    75-1000 cps 10 g.
  • Typical Shock Input:
    15 g - .011 sec.
    30 g - .011 sec. (crash safety).
  • Note: Vibration & shock input levels vary widely; usually specified by airframe & component manufacturers.
  • MIL-C-172 (general reference for size & hardware requirements).
  • Natural frequency 10-25 cps.
  • All attitude performance.
  • Maximum isolation efficiency.
  • Low amplification at resonance.
  • Minimum rotational coupling.
  • Minimum shock output.
  • Minimum sway space.
  • Minimum size and weight.
  • Electrical grounding.
  • Designed to ensure equipment survival.
  • Note: Isolator characteristics are a function of mission of aircraft and performance parameters to which equipment is subjected.
  • Example: extreme sustained acceleration.
  • T-Mounts; B-Mounts; Cupmounts.
  • 5200 Series; E21/E22 Series; 6300/6550 Series.
  • Cable Mounts.
  • ME Series; TTA & TTB Series.
  • Special High-Performance Mounts.
  •     Carrier based.
  • Flight recorder.
  • Radar; Radios.
  • Air data recorder.
  • Gyroscopes; Instrument panels.
  • Engine pressure ratio transducers.
  • Radar antennae; Antenna couplers.
  • Instruments, indicators, gages, etc.
  • Electronic countermeasures equipment.
  • Fire control radar and computers.
  • Bomb racks and sights.
  • Integrated avionics packages.
  • Photographic and other optical equipment.
  • Propulsion system.
  • Air turbulence.
  • Landing impact.
  • Amplified vibration caused by structural resonances.
  • Gunfire.
  • Catapult take-offs.
  • Arrested landings.
  • Temperature and humidity extremes.
  • Altitude.
  • Chemical action of hydraulic fluids, fuels, lubricants.
  • Sunlight and ozone.
  • Salt spray.
  • Fungus.
  • Sand and dust.
  • MIL-E-5400; MIL-E-5272; MIL-STD-810.
  • Typical Vibration Input:
    5 - 10 cps - .080” D. A.
    10 - 15 cps - . 41 g.
    15 - 75 cps - .036” D. A.
    75 - 1000 cps - 10 g.
  • Typical Shock Input:
    15 g - .011 sec.
    30 g - .011 sec. (crash safety).
  • Note: Vibration & shock input levels vary widely; usually specified by airframe & component manufacturers. Landing shocks can be as severe as 12 g, .125 sec.)
  • MIL-C-172 (general reference for size & hardware requirements).
  • Natural frequency 10-25 cps.
  • All attitude performance.
  • Maximum isolation efficiency.
  • Low amplification at resonance.
  • Minimum rotational coupling.
  • Minimum shock output.
  • Minimum sway space.
  • Minimum size and weight.
  • Electrical grounding.
  • Designed to ensure equipment survival.
  • Note: Isolator characteristics are a function of mission of aircraft and performance parameters to which equipment is subjected.
  • Example: extreme sustained acceleration.
  • T-Mounts; B-Mounts; Cupmounts.
  • 5200 Series; E21/E22 Series; 6300/6550 Series.
  • Cable Mounts.
  • ME Series; TTA & TTB Series.
  • Special High-Performance Mounts.
  • Helicopters
  • Radar; Radios.
  • Gyroscopes; Instrument panels.
  • Radar antennae; Antenna couplers.
  • Instruments, indicators, gages, etc.
  • Integrated avionics packages.
  • Fire control equipment
  • Propulsion system.
  • Rotor.
  • Landing impact.
  • Amplified vibration caused by structural resonances.
  • Gunfire.
  • Temperature and humidity extremes.
  • Altitude.
  • Chemical action of hydraulic fluids, fuels, lubricants.
  • Sunlight and ozone.
  • Salt spray; Sand and dust.
  • Fungus.
  • MIL-E-5400; MIL-E-5272; MIL-STD-810.
  • Airframe and Component Manufacturers’ Specifications.
  • Typical Vibration Input:
    5 - 20 cps .100” D. A.
    20 - 32 cps 2 g.
    32 - 72 cps .036” D. A.
    72 - 500 cps 10 g.
  • Typical Shock Input:
    15 g - .011 sec.
    30 g - .011 sec. (crash safety).
  • MIL-C-172 (general reference for size & hardware requirements).
  • Natural frequency 5-15 cps.
  • Maximum isolation efficiency.
  • Low amplification at resonance.
  • Minimum rotational coupling.
  • Minimum shock output.
  • Minimum sway space.
  • Minimum size and weight.
  • Electrical grounding.
  • Designed to ensure equipment survival.
  • H-Mounts.
  • 5200 Series; E21/E22 Series.
  • HTTA Series.
  • Cable Mounts.
  • SLM Series.
  • Specially-designed isolation systems to meet severe vibration inputs/